Paper
31 May 2013 Contamination effects in single-mode optical fiber connectors
Geoff M. Proudley, Henry J. White
Author Affiliations +
Abstract
The use of singlemode fibers on aircraft has been limited due to the perceived robustness of the connection and cost implications compared to multi-mode fiber systems. However, single-mode fibers are required for certain functions such as wavelength division multiplexing, analogue RF over fiber and fiber Bragg grating systems for structural health monitoring. In this paper a selection of connectors using singlemode fibers have been assessed for their operation in the presence of contaminants, both particulate and fluid. Butt-coupled connectors and expanded-beam type connectors were assessed under the same conditions. The results have shown that different connector designs behave differently in the presence of contamination but no single design could perform well over all test conditions. The results of the tests will be presented and discussed.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Geoff M. Proudley and Henry J. White "Contamination effects in single-mode optical fiber connectors", Proc. SPIE 8720, Photonic Applications for Aerospace, Commercial, and Harsh Environments IV, 87200W (31 May 2013); https://doi.org/10.1117/12.2018074
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Connectors

Contamination

Optical fibers

Single mode fibers

Reflection

Fiber optics

Aerospace engineering

RELATED CONTENT

Optical Technology Used In The Atlanta Single-Mode Experiment
Proceedings of SPIE (November 08 1983)
Single Mode Coupler Manufacturing
Proceedings of SPIE (January 15 1986)
Multimode fiber optic cable: how long will it last?
Proceedings of SPIE (November 04 1993)
Wavelength-multiplexed multimode fiber optic sensor system
Proceedings of SPIE (November 27 1996)

Back to Top