Development of an aluminum nitride-silicon carbide material set for high-temperature sensor applications

Benjamin A. Griffin; Scott D. Habermehl; Peggy J. Clews

doi:10.1117/12.2050896

5 June 2014 Development of an aluminum nitride-silicon carbide material set for high-temperature sensor applications

Benjamin A. Griffin, Scott D. Habermehl, Peggy J. Clews

Proceedings Volume 9113, Sensors for Extreme Harsh Environments; 91130A (2014) https://doi.org/10.1117/12.2050896
Event: SPIE Sensing Technology + Applications, 2014, Baltimore, MD, United States

Abstract

A number of important energy and defense-related applications would benefit from sensors capable of withstanding extreme temperatures (>300°C). Examples include sensors for automobile engines, gas turbines, nuclear and coal power plants, and petroleum and geothermal well drilling. Military applications, such as hypersonic flight research, would also benefit from sensors capable of 1000°C. Silicon carbide (SiC) has long been recognized as a promising material for harsh environment sensors and electronics because it has the highest mechanical strength of semiconductors with the exception of diamond and its upper temperature limit exceeds 2500°C, where it sublimates rather than melts. Yet today, many advanced SiC MEMS are limited to lower temperatures because they are made from SiC films deposited on silicon wafers. Other limitations arise from sensor transduction by measuring changes in capacitance or resistance, which require biasing or modulation schemes that can with- stand elevated temperatures. We are circumventing these issues by developing sensing structures directly on SiC wafers using SiC and piezoelectric aluminum nitride (AlN) thin films. SiC and AlN are a promising material combination due to their high thermal, electrical, and mechanical strength and closely matched coefficients of thermal expansion. AlN is also a non-ferroelectric piezoelectric material, enabling piezoelectric transduction at temperatures exceeding 1000°C. In this paper, the challenges of incorporating these two materials into a compatible MEMS fabrication process are presented. The current progress and initial measurements of the fabrication process are shown. The future direction and the need for further investigation of the material set are addressed.

Citation Download Citation

Benjamin A. Griffin, Scott D. Habermehl, and Peggy J. Clews "Development of an aluminum nitride-silicon carbide material set for high-temperature sensor applications", Proc. SPIE 9113, Sensors for Extreme Harsh Environments, 91130A (5 June 2014); https://doi.org/10.1117/12.2050896

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available