Presentation + Paper
15 April 2016 Microfabrication of stacked dielectric elastomer actuator fibers
Author Affiliations +
Abstract
Dielectric elastomer actuators (DEA) are one of the best candidate materials for next generation of robotic actuators, soft sensors and artificial muscles due to their fast response, mechanical robustness and compliance. However, high voltage requirements of DEAs have impeded their potential to become widely used in such applications. In this study, we propose a method for fabrication of silicon based multilayer DEA fibers composed of microlevel dielectric layers to improve the actuation ratios of DEAs at lower voltages. A multi-walled carbon nanotube - polydimethylsiloxane (MWCNT/PDMS) composite was used to fabricate mechanically compliant, conductive parallel plates and electrode connections for the DEA actuators. Active surface area and layer thickness were varied to study the effects of these parameters on actuation ratio as a function of applied voltage. Different structures were fabricated to assess the flexibility of the fabrication method for specific user-end applications.
Conference Presentation
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Mert Corbaci, Wayne Walter, and Kathleen Lamkin-Kennard "Microfabrication of stacked dielectric elastomer actuator fibers", Proc. SPIE 9798, Electroactive Polymer Actuators and Devices (EAPAD) 2016, 979823 (15 April 2016); https://doi.org/10.1117/12.2219229
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Actuators

Dielectrics

Microfabrication

Electroactive polymers

Dielectric elastomer actuators

Electrodes

Semiconducting wafers

Back to Top