Paper
1 February 1989 The Effects Of Variations In The Photocathode Voltages Of Electronic Streak Cameras
Mark W Bowers, Gregory L. Biggs, Joseph J. Ronchetto, Alan T. Teruya
Author Affiliations +
Abstract
Electronic streak cameras are used to record subnanosecond data at the Nevada Test Site. It has been found that externally induced variations in the photocathode voltage of the streak tube can produce both temporal and spatial errors on the output image. An elec on beam tracing code was used to model the magnification as a function of photocathode voltage and signal input position for streak tubes manufactured by RCA, ITT, and Kentech. Las tests were also performed where pulsed and radio frequency signals were induced upon the photocathode and the errors on e resultant image were compared with e error sredict-s by the electron II - am code. Also, methods for processing the distortion in digitized images were investigated. This pas r will discuss the results of these investigations.
© (1989) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Mark W Bowers, Gregory L. Biggs, Joseph J. Ronchetto, and Alan T. Teruya "The Effects Of Variations In The Photocathode Voltages Of Electronic Streak Cameras", Proc. SPIE 0981, High Speed Photography, Videography, and Photonics VI, (1 February 1989); https://doi.org/10.1117/12.948663
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Streak cameras

Image processing

Cameras

Modulation

Distortion

High speed photography

Fiber optics

Back to Top