1 July 1997 Surface control and vibration suppression of a large millimeter-wave telescope
David R. Smith, Peter C. Parziale
Author Affiliations +
The Large Millimeter-wave Telescope/Gran Telescopio Milime ´ trico (LMT/GTM), is a 50-m diameter radio telescope designed to operate at 1-mm wavelengths. To achieve its surface accuracy requirements, the telescope relies on an actively controlled primary surface. The active primary enables active correction of errors in the reflecting surface caused by thermal and gravitational deformations of the supporting backstructure. In addition to these slowly varying loads, there are higher frequency disturbances caused by some observation techniques. In a conventional telescope, the observer must wait for the vibration to decay naturally before continuing an observation. However, for an active surface telescope (such as the LMT/GTM), the mass of the surface and the large number of actuators can be used to add damping to the support structure. The use of active surfaces in vibrational damping of their support structures is investigated. A method is presented that enables decoupling of the vibrational modes in such a way that the surface figure can be controlled simultaneously.
David R. Smith and Peter C. Parziale "Surface control and vibration suppression of a large millimeter-wave telescope," Optical Engineering 36(7), (1 July 1997). https://doi.org/10.1117/1.601393
Published: 1 July 1997
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Telescopes

Actuators

Control systems

Space telescopes

Vibration control

Sensors

Radio astronomy

RELATED CONTENT


Back to Top