1 March 2008 General model for moiré contouring, part 2: applications
Cesar A. Sciammarella, Luciano Lamberti, Antonio Boccaccio, Eustachio Cosola, Domenico Posa
Author Affiliations +
Abstract
Applications are presented of the general shadow-projection moiré model described in the companion paper, "A general model for moiré contouring, part 1: theory." Two examples are discussed in detail. One example deals with the deflection of a large-size thin panel subjected to bending. The other example analyzes the accuracy that can be achieved in laser lithography rapid prototyping. The first example illustrates some theoretical aspects of the general contouring model proposed in this research and explains the reasons for differences between theoretical predictions and experimental results. In the second example, the whole process of data gathering and merging using geometric primitives and optimization techniques is demonstrated practically. Finally, a clear relationship between the measured standard deviations and moiré sensitivity values is obtained. The results show that the proposed methodologies lead to a quasi-quadratic correlation.
©(2008) Society of Photo-Optical Instrumentation Engineers (SPIE)
Cesar A. Sciammarella, Luciano Lamberti, Antonio Boccaccio, Eustachio Cosola, and Domenico Posa "General model for moiré contouring, part 2: applications," Optical Engineering 47(3), 033606 (1 March 2008). https://doi.org/10.1117/1.2899040
Published: 1 March 2008
Lens.org Logo
CITATIONS
Cited by 26 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Projection systems

Cameras

Stereolithography

Optical engineering

Finite element methods

Computer aided design

Optical testing

Back to Top