|
1.IntroductionAnalog-to-digital converters (ADCs) are key devices in high-speed signal processing such as high-definition video and ultra-high-speed optical communication. In recent years, all-optical ADCs have attracted the attention of researchers due to their high sampling rate and ultra-wide bandwidth.1 So far, many different schemes of all-optical ADC have been developed, in which the interferometric ADC has been widely used due to its simple structure and high speed, such as Taylor scheme,2,3 nonlinear optical loop mirror (NOLM),4,5 and phase shifted optical quantization (PSOQ).6–10 The advantage of the PSOQ is its simple structure: only one phase modulator is needed. No requirement for the half-wave voltage of the modulator and no nonlinear effects are utilized, which makes the scheme more stable and reduced power consumption. In PSOQ, the key issue is how to obtain the desired phase shift precisely to ensure the effective number of bits (ENOB). Though some feasible approaches have been presented, such as a fiber squeezer,11 multi-wavelength phase shift in phase modulator,12 unbalanced Mach-Zehnder modulator,13 and electrically controllable phase shifter,14 these approaches either need additional mechanical adjustment11,14 or the configuration is not flexible and the requirement of the device is strict,12,13 which leads to the realization of the PSOQ’s complication. In this paper, an improved approach to realize the desired phase shift is presented. The different phase-shifted transfer functions in PSOQ can be obtained by the fact that different wavelengths of sampling pulses have different modal birefringence in the PMF.15 16 proper wavelengths corresponding to 16 quantization channels with different phase shifts are obtained by 16 wavelengths laser, and a 2.5 GHz sinusoidal electrical analog signal is quantized. The experimental result shows that an effective number of bits of 4.5 can be achieved. Compared to the previous approaches, the benefits of the presented approach in the paper are its simple configuration and flexible realization of the phase shift. 2.Principles of OperationFigure 1 shows the schematic of the proposed ADC, where different wavelength sampling pulses are combined as a synchronized multi-wavelength sampling source by a multiplexer. The synchronicity of wavelength pulses can be realized by optical delay lines. After the multiplexer, a 45-deg. polarizer is used to make the orthogonal components of the sampling pulse align with or axis of the polarization modulator (PolM). The phase difference between the two polarized states is varied with the amplitude of the analog signal input. When the phase-modulated multi-wavelength sampling pulses are fed into a PMF, the different wavelengths of pulses will have different phase shifts due to the modal birefringence. Then an in-line analyzer is used to polarization interference. Here the advantage of the PolM is to mitigate the walk-off between the two polarized states of the pulse before polarization interference.16 At the output port, separate quantization channels are obtained by a demultiplexer and the transmission intensity of the () is: where () is the amplitude of the input analog signal, is the half-wave voltage of the Pol M, is the refractive index difference between the two orthogonally polarized states, is the length of the PMF. From Eq. (1), the phase difference between two adjacent wavelengths and is: when , is the wavelength interval, is the center wavelength of the tunable laser. Eq. (2) can be written as:From Eq. (3), the desired phase shift can be obtained automatically after the light travelling through the PMF without any extra adjustment and -channel PSOQ can be realized by using separate wavelengths. In PSOQ, two adjacent quantization channels should have a fixed phase difference (or ), is the number of channels. Therefore, the desired wavelength interval for an -channel PSOQ is: This equation shows that for a fixed -channel PSOQ, the wavelength interval is not fixed but can be designed flexible by choosing the proper parameter and . 3.Experimental ResultsA one channel proof-of-principle experiment with 5-bit resolution has been performed, which is shown in Fig. 2. In the experiment, a wavelength tunable DFB laser source is employed to emulate the multi-wavelength channels. The wavelength of the laser source can be turned from 1551.78 to 1553.98 nm with a 0.01 nm spectrum separation by adjusting the temperature. A polarization controller (PC) is used to adjust the polarization states of the laser source to align 45-deg. with the axis of the modulator. Using a polarization modulator with a half-wave voltage of 3.5 V, the laser is modulated by a 20.88 dBm sinusoidal wave signal with a frequency of 2.5 GHz. The modulated laser wave travels through a PMF and the polarization interference is happened in a polarization beam splitter (PBS). The output optical signal is detected by a photo-detector (PD) with the bandwidth of 50 GHz and captured by a real-time oscilloscope (TekDSA71254C, 12.5 GHz). As the tunable range of the laser used in the experiment is 2.2 nm and the optical path difference induced by the birefringence of the PMF is 1.26 mm, the wavelength interval of 0.06 nm is corresponding to a 5-bit ADC. Here the wavelength separation of 0.06 nm seems meaningless for pulsed lasers due to the spectral overlap. However, according to Eq. (4), the wavelength separation can be increased by choosing the number . As a result, the wavelength separation of 1.98 and 0.06 nm are the equivalence cases. Therefore it is sufficient to demonstrate the concept of quantization. An optical spectrum analyzer is employed to measure the wavelength of the laser and sixteen proper wavelengths are chosen to realize the phase shifts of 0, , , which is shown in Table 1. From Table 1, the errors of the wavelength interval are less than 0.01 nm compared to the designed value (0.06 nm). The temporal waveforms of these 16 wavelengths are sampled and recorded on the oscilloscope, three of which are shown in Fig. 3. Table 1Phase shift and corresponding wavelength of the tunable laser source.
The binary codes are obtained by threshold decision and encoding, which are performed offline. According to these quantization codes, the transfer function of all optical ADC is obtained (see Fig. 4). The transfer function is monotonically increasing with no missing code performance. An ideal transfer function is also presented in Fig. 4. Comparing the quantized values with the ideal values, a signal-to-noise ratio (SNR) of 28.85 dB is obtained, corresponding to an ENOB of 4.5.17 As the ideal resolution is 5 bits, the deviation from the ideal case is 0.5 bits. The quantization error is mainly caused by the wavelength shift and the random noise in the fiber link. Figure 5 shows the SFDR of the calculated fast Fourier transform (FFT) results of the scheme, and the SFDR is 37.28 dB. From the figure, the first, second, and third harmonic is suppressed due to the high precision of the phase shift of the presented scheme, and the high harmonics noise is mainly induced by the real-time oscilloscope used in the experiment. The SFDR of the scheme can be improved greatly by low-pass filtering. If the harmonic higher than fourth is ignored, the SFDR can reach to 52.8 dB. In order to obtain higher resolution, many more wavelengths are needed. For example, 128 different wavelengths are needed for a photonic ADC with 8 read-out bits, which is difficult to realize in practical terms. However, if we take the advantage of the design Taylor proposed in Refs. 2 and 3, only 16 different wavelengths are needed for an 8-read-out bits ADC when we combine a 16-channel PSOQ and a 4-channel PSOQ together. If we use a WDM of 200 GHz as a demultiplexer, the pulse lengths are about 5 ps and the wavelength separation of 1.6 nm is enough for such an 8-bit photonic ADC. 4.ConclusionIn summary, an all-optical ADC that utilizes the birefringence of the polarization maintaining fiber is described and experimentally demonstrated. As different wavelength lasers travelling through the PMF would have different phase shifts due to the birefringence, the desired phase shift of each quantization channel can be obtained by selecting the proper wavelength. The presented scheme is demonstrated by a one channel proof-of-concept experiment. 16 different wavelengths are realized by a tunable laser source and a 2.5 GHz sinusoidal RF signal is quantized. The experimental result shows that an ENOB of 4.5 has been achieved, and the SFDR reaches to 37.28 dB. AcknowledgmentsThis work is supported by the National Nature Science Foundation of China (60977003 and 61032005). ReferencesG. C. Valley,
“Photonic analog-to-digital converters,”
Opt. Express, 15
(5), 1955
–1982
(2007). http://dx.doi.org/10.1364/OE.15.001955 OPEXFF 1094-4087 Google Scholar
H. Taylor,
“An optical analog-to-digital converter-Design and analysis,”
IEEE J. Quantum Electron., 15
(4), 210
–216
(1979). http://dx.doi.org/10.1109/JQE.1979.1069987 IEJQA7 0018-9197 Google Scholar
B. JalaliY. M. Xie,
“Optical folding-flash analog-to-digital converter with analog encoding,”
Opt. Letters, 20
(18), 1901
–1903
(1995). http://dx.doi.org/10.1364/OL.20.001901 OPLEDP 0146-9592 Google Scholar
K. Ikedaet al.,
“Optical quantizing and coding for ultrafast A/D conversion using nonlinear fiber-optic switches based on Sagnac interferometer,”
Opt. Express, 13
(11), 4296
–4302
(2005). http://dx.doi.org/10.1364/OPEX.13.004296 OPEXFF 1094-4087 Google Scholar
Y. Miyoshiet al.,
“Multiperiod PM-NOLM with dynamic counter-propagating effects compensation for 5-Bit all-optical analog-to-digital conversion and its performance evaluations,”
J. Lightwave Technol., 28
(4), 415
–422
(2010). http://dx.doi.org/10.1109/JLT.2009.2029543 JLTEDG 0733-8724 Google Scholar
J. StigwallS. Galt,
“Interferometric analog-to-digital conversion scheme,”
IEEE Photon. Technol. Lett., 17
(2), 468
–470
(2005). http://dx.doi.org/10.1109/LPT.2004.839452 IPTLEL 1041-1135 Google Scholar
W. Liet al.,
“All-optical analog-to-digital conversion based on polarization-differential interference and phase modulation,”
IEEE Photon. Technol. Lett., 19
(8), 625
–627
(2007). http://dx.doi.org/10.1109/LPT.2007.894939 IPTLEL 1041-1135 Google Scholar
H. ChiJ. Yao,
“A photonic analog-to-digital conversion scheme using Mach-Zehnder modulators with identical half-wave voltages,”
Opt. Express, 16
(2), 567
–572
(2008). http://dx.doi.org/10.1364/OE.16.000567 OPEXFF 1094-4087 Google Scholar
X. Fuet al.,
“Noninterferometric optical phase-shifter module in phase-shifted optical quantization,”
034301
(2009). http://dx.doi.org/10.1117/1.3089884 Google Scholar
Y. Wanget al.,
“Improvement of photonic ADC based on phase-shifted optical quantization by using additional modulators,”
IEEE Photon. Technol. Lett., 24
(7), 566
–568
(2012). http://dx.doi.org/10.1109/LPT.2012.2183634 IPTLEL 1041-1135 Google Scholar
Q. Wuet al.,
“40GS/s optical analog-to-digital conversion system and its improvement,”
Opt. Express, 17
(11), 9252
–9257
(2009). http://dx.doi.org/10.1364/OE.17.009252 OPEXFF 1094-4087 Google Scholar
Q. Wuet al.,
“All-optical analog-to-digital conversion using inherent multiwavelength phase shift in LiNbO3 phase modulator,”
IEEE Photon. Technol. Lett., 20
(12), 1036
–1038
(2008). http://dx.doi.org/10.1109/LPT.2008.924189 IPTLEL 1041-1135 Google Scholar
C. H. SarantosN. Dagli,
“Aphotonic analog-to-digital converter based on an unbalanced Mach-Zehnder quantizer,”
Opt. Express, 18
(14), 14598
–14603
(2010). http://dx.doi.org/10.1364/OE.18.014598 OPEXFF 1094-4087 Google Scholar
H. Chiet al.,
“Proposal for photonic quantization with differential encoding using a phase modulator and delay-line interferometers,”
Opt. Letters, 36
(9), 1629
–1631
(2011). http://dx.doi.org/10.1364/OL.36.001629 OPLEDP 0146-9592 Google Scholar
G. P. Agrawal,
“Fiber characteristics,”
Nonlinear Fiber Optics, 11
–13 Elsevier, Amsterdam
(2007). Google Scholar
L. Maet al.,
“Improvement of all optical ADC based on phase-shifted optical quantization by using a polarization modulator,”
in Optical Fiber Commun. Conf. and Exposition and the National Fiber Opt. Engineers Conf.,
1
–3
(2011). Google Scholar
R. H. Walden,
“Analog-to-digital converter survey and analysis,”
IEEE J. Sel. Areas Commun., 17
(4), 539
–550
(1999). http://dx.doi.org/10.1109/49.761034 ISACEM 0733-8716 Google Scholar
BiographyYang Wang received his BE degree from the Department of Electronics Science and Technology, Harbin Institute of Technology, Harbin, China, in 2008. He is currently pursuing his PhD degree in the Department of Electronics Engineering, Tsinghua University, Beijing, China. His research interests include microwave photonics and all-optical signal processing. |