1 July 2008 Microstrain detection using simultaneous endoscopic pulsed digital holography
Author Affiliations +
Abstract
A simultaneous 2-D pulsed digital holographic setup that incorporates a rigid endoscope is used to inspect hidden object areas in order to measure microstrains. The system was tested on the internal surface of a harmonically vibrating rectangular metal box with a fracture on its surface. The simultaneous setup allows the acquisition of displacement data from two different object illumination positions at the same time, so that the system is capable of studying nonrepeatable dynamic events. Further analysis using displacement data generates a gradient strain map where the fracture is successfully detected with the corresponding strain magnitude and direction quantified.
©(2008) Society of Photo-Optical Instrumentation Engineers (SPIE)
Tonatiuh Saucedo-Anaya, Manuel de la Torre Ibarra, and Fernando Mendoza Santoyo "Microstrain detection using simultaneous endoscopic pulsed digital holography," Optical Engineering 47(7), 073601 (1 July 2008). https://doi.org/10.1117/1.2955510
Published: 1 July 2008
Lens.org Logo
CITATIONS
Cited by 7 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Endoscopes

Holograms

Digital holography

Inspection

Optical engineering

Endoscopy

Holography

Back to Top