1 November 2009 Effect of target surface orientation on the range precision of laser detection and ranging systems
Author Affiliations +
Abstract
Airborne laser detection and ranging (LADAR) systems are used for applications such as three-dimensional imaging, topographic mapping, and target recognition. Typical systems transmit laser beams through apertures that are a few inches wide and use pulses that are roughly a nanosecond in duration. If the pulse reflects off a target that is tilted with respect to the LADAR's line-of-sight, then the reflection process will elongate the received signal as compared to the transmitted pulse. If the range is more than a few kilometers and the target is tilted more than about forty-five degrees, the increase in the width of the received pulse produces a signifcant drop in range precision as compared to when the target is perpendicular to the line-of-sight.
Steven Eric Johnson "Effect of target surface orientation on the range precision of laser detection and ranging systems," Journal of Applied Remote Sensing 3(1), 033564 (1 November 2009). https://doi.org/10.1117/1.3271047
Published: 1 November 2009
Lens.org Logo
CITATIONS
Cited by 28 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
LIDAR

Signal to noise ratio

Pulsed laser operation

Imaging systems

Laser beam propagation

Signal processing

Receivers

RELATED CONTENT


Back to Top