1 July 2002 Measurement and influences of glass surface layers on thin film optical properties
Zhengtian Gu, Peihui Liang, Weiqing Zhang
Author Affiliations +
A new and simple method is proposed to analyze the profiles of glass surface layers based on their reflectance for p-polarized light. By measuring the angle spectrum ?(?i) (?=Ia/Ib), where Ia and Ib are the intensities of reflection from the front and the back surface of the glass, and fitting the results with theoretical relations, the refractive index ns and extinction coefficient ks of plane glass surfaces can easily be obtained. Experimentally, glass samples subjected to different cleaning treatments have been analyzed. The results show that ns and ks of the glass surface increase exponentially with the depth into the surface layers, and an etched glass sample has a smaller extinction coefficient on its surface. This is confirmed by atomic-force-microscope observation and by laser-damage testing. In addition, the influence of the glass surface layers on the properties of films coated on one side or both sides of the glass substrate is analyzed. Dip-coated polymethyltriethoxysilane (PMTES) films and spin-coated PMMA films have been measured. It is found that the optical parameters of PMTES films and azo-doped PMMA films are in agreement with the experimental results only if the glass surface layers are considered.
©(2002) Society of Photo-Optical Instrumentation Engineers (SPIE)
Zhengtian Gu, Peihui Liang, and Weiqing Zhang "Measurement and influences of glass surface layers on thin film optical properties," Optical Engineering 41(7), (1 July 2002). https://doi.org/10.1117/1.1480426
Published: 1 July 2002
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Glasses

Thin films

Refractive index

Optical testing

Polymethylmethacrylate

Laser damage threshold

Reflectivity

Back to Top