1 February 2008 Novel multiresolution approach for an adaptive structured light system
Author Affiliations +
Abstract
3-D triangulation measurement systems with a fixed geometrical configuration have practical limitations that make them inappropriate for a wide variety of applications. The reason is that the ratio between the depth recovery error and the lateral extension is a constant that depends on the geometrical setup. Therefore, with a fixed triangulation setup, there is a tradeoff between field of view and depth resolution. As a consequence, measuring large areas with low depth recovery error necessitates the use of multiresolution techniques. In this work, we propose a multiresolution technique based on a camera-projector system previously calibrated and a second auxiliary camera that can move freely. The method consists of making first a measurement with a large field of view (coarse measurement). Afterwards, the geometrical configuration of the 3-D rig is changed to acquire a small field of view (fine measurement) that is referred to the original reference system and calibration parameters by means of the auxiliary camera. Using this method, a multiresolution reconstruction is possible without any optimization, registration, or recalibration process. Experimental results, which show a decrease of approximately one order of magnitude in the depth recovery error between fine and coarse measures, demonstrate the feasibility of the proposed method.
©(2008) Society of Photo-Optical Instrumentation Engineers (SPIE)
Javier Vargas and Juan Antonio Quiroga "Novel multiresolution approach for an adaptive structured light system," Optical Engineering 47(2), 023601 (1 February 2008). https://doi.org/10.1117/1.2857404
Published: 1 February 2008
Lens.org Logo
CITATIONS
Cited by 9 scholarly publications and 1 patent.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Cameras

Projection systems

Phase measurement

Calibration

Imaging systems

Structured light

3D metrology

RELATED CONTENT

Defect inspection by an active 3D multiresolution technique
Proceedings of SPIE (October 03 2008)

Back to Top