Paper
5 July 1989 Anti-Reflective Coating On Borosilicate Long Tubes Industrial Process And Quality Control
N. Eisenberg, Y. Ben-Dor, J. P. Warschawski
Author Affiliations +
Proceedings Volume 1038, 6th Mtg in Israel on Optical Engineering; (1989) https://doi.org/10.1117/12.951105
Event: Sixth Meeting of Optical Engineering in Israel, 1988, Tel Aviv, Israel
Abstract
It has been shown that in order to improve the optical efficiency of a solar trough evacuated pipe used for Luz solar electricity generating systems, an appropriate low cost anti-reflective coating process should be implemented in the solar collector production line, and that a dip process is the optimal choice for this application. It is shown in this paper that pumping the coating solution out of the coating container rather than withdrawing the tubes is the most appropriate coating process for Luz's needs. The same method was employed for the second coating solution which was used both for mechanical abrasion resistance improvement and for increasing optical transmissivity. The measuring procedure for quality insurance of the coated tube was investigated thoroughly and an "in-house" technique, including solar simulation and spiral movement of the tested tube, was chosen in preference to the other standard procedures (spectrophotometry, reflectometry). The complete AR coating facility and production procedure is described and the results of the industrial process are analyzed.
© (1989) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
N. Eisenberg, Y. Ben-Dor, and J. P. Warschawski "Anti-Reflective Coating On Borosilicate Long Tubes Industrial Process And Quality Control", Proc. SPIE 1038, 6th Mtg in Israel on Optical Engineering, (5 July 1989); https://doi.org/10.1117/12.951105
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Coating

Antireflective coatings

Solar processes

Process control

Optical engineering

Solar energy

Spectrophotometry

Back to Top