Paper
11 September 1989 Simple Formulas For Estimating The Microwave Shielding Effectiveness Of Ec-Coated Optical Windows
Claude A. Klein
Author Affiliations +
Abstract
Electrically conductive (EC) coatings on optically transparent windows can be used to protect internal system's components against electromagnetic interference effects. The purpose of this paper is to derive simple but correct formulas for assessing the far-field shielding effectiveness of a thin metallic film or multilayer stack deposited on top of a dielectric slab. Using conventional transmission-line theory in conjunction with proper expressions for the transmittance of a perfect dielectric, the author demonstrates that, for coatings much thinner than the skin depth, the following holds. CO In a half-wave geometry, the shielding effectiveness (in decibel) is a function of the sheet resistance only: (SEλ/2 = 20log(1+188.5/Rs) if Rs is in ohm per square. And (b), in a quarter-wave geometry, the shielding effectiveness is best approximated by means of a semiempirical expression, (SE)λ/4 = 201og(1+Er)/(2√Er) + 188.5/(√ErRs), where Er refers to the dielectric constant of the substrate. These formulas provide upper and lower limits for the effective shielding performance of an EC-coated window, depending upon the phase thickness; they accurately predict measured microwave attenuations for a variety of visible- and infrared-light transmitting domes as well as for standard conductive-glass windows.
© (1989) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Claude A. Klein "Simple Formulas For Estimating The Microwave Shielding Effectiveness Of Ec-Coated Optical Windows", Proc. SPIE 1112, Window and Dome Technologies and Materials, (11 September 1989); https://doi.org/10.1117/12.960783
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Dielectrics

Resistance

Microwave radiation

Transmittance

Optical coatings

Signal attenuation

Metals

Back to Top