Paper
16 June 2023 The simulation research on mechanical properties of shipborne electronic display console
Xiancheng Luo
Author Affiliations +
Proceedings Volume 12639, Third International Conference on Mechanical Design and Simulation (MDS 2023); 126391H (2023) https://doi.org/10.1117/12.2682082
Event: Third International Conference on Mechanical Design and Simulation (MDS 2023), 2023, Xi'an, China
Abstract
According to the requirements of structural vibration test standard of shipborne electronic equipment, the finite element model of the electronic display console was established by ANSYS, and the modal frequency, sine sweep vibration response, bumping response and shock response of the display console were obtained. According to the calculation results, the strength of the console is checked and the mechanical reliability of the console is analyzed. The results show that the stresses near the mounting holes of the electronic console shock absorber are relatively high, but they are all lower than the maximum allowable stress of the console, and the console can work reliably under various test conditions. The modeling and analysis method presented in this paper can provide a good reference for the mechanical analysis of similar electronic equipment.
© (2023) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xiancheng Luo "The simulation research on mechanical properties of shipborne electronic display console", Proc. SPIE 12639, Third International Conference on Mechanical Design and Simulation (MDS 2023), 126391H (16 June 2023); https://doi.org/10.1117/12.2682082
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Vibration

Finite element methods

Frequency response

Safety

Structural design

Analytical research

Design and modelling

Back to Top