Body measurement based on a multiview structured light 3D imaging system

Meng Wang; Hailong Chen; Qijian Tang; Xiang Peng; Yu Fu; Xiaoli Liu

doi:10.1117/12.3023318

15 February 2024 Body measurement based on a multiview structured light 3D imaging system

Meng Wang, Hailong Chen, Qijian Tang, Xiang Peng, Yu Fu, Xiaoli Liu

Proceedings Volume 13069, International Conference on Optical and Photonic Engineering (icOPEN 2023); 1306907 (2024) https://doi.org/10.1117/12.3023318
Event: International Conference on Optical and Photonic Engineering (icOPEN 2023), 2023, Singapore, Singapore

Abstract

In this paper, a multi-view structured light three dimensional (3D) imaging system is descried, which can perform rapid 3D reconstruction of the human body and automatically extract anthropometric data from it. This system contains 12 sets of 3D imaging sensors distributed on four pillars. Each 3D imaging sensor consists of a binocular stereo system, an Infrared laser projector and a synchronous control system based on the Field Programmable Gate Array (FPGA). The projector provides phase-shifting fringe patterns and gray code for the binocular stereo system to make 3D reconstruction. The FPGA control system enables the sensor to achieve high speed scanning. A two-step calibration method is used to calibrate the internal and external parameters of each 3D imaging sensor and external parameters between these sensors. After the 3D human body data acquisition, major body joints will be extracted as key-points. In this process, the initial location of these key-points are extracted based on a deep learning method, and then they are further corrected with local point cloud analysis. With the assistance of these key-points, the anthropometric data, such as distances (lengths, breadths, heights) and circumferences of the human body, can be calculated from its 3D data. Based on the techniques described above, the multi-view 3D imaging system can complete the whole body scanning in 2 seconds and automatically measure more than sixty dimensional data after analyzing the reconstructed 3D human data.

(2024) Published by SPIE. Downloading of the abstract is permitted for personal use only.

Citation Download Citation

Meng Wang, Hailong Chen, Qijian Tang, Xiang Peng, Yu Fu, and Xiaoli Liu "Body measurement based on a multiview structured light 3D imaging system", Proc. SPIE 13069, International Conference on Optical and Photonic Engineering (icOPEN 2023), 1306907 (15 February 2024); https://doi.org/10.1117/12.3023318

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
6 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Sensors

3D metrology

3D scanning

Point clouds

Stereoscopy

3D image processing

Imaging systems

Show All Keywords

Keywords/Phrases

Search In:

Publication Years