Uncertainty estimation by the concept of virtual instruments

Han Haitjema; Bas W. van Dorp; M. Morel; Piet H. J. Schellekens

doi:10.1117/12.445615

22 October 2001 Uncertainty estimation by the concept of virtual instruments

Han Haitjema, Bas W. van Dorp, M. Morel, Piet H. J. Schellekens

Proceedings Volume 4401, Recent Developments in Traceable Dimensional Measurements; (2001) https://doi.org/10.1117/12.445615
Event: Lasers in Metrology and Art Conservation, 2001, Munich, Germany

Abstract

For the calibration of length standards and instruments, various methods are available for which usually an uncertainty according to the GUM [1] can be set up. However, from calibration data of a measuring instrument it is not always evident what the uncertainty will be in an actual measurement (or calibration) using that calibrated instrument. Especially where many measured data are involved, such as in CMM measurements, but also in typical dimensional geometry measurements such as roughness, roundness and flatness measurements, setting up an uncertainty budget according to the GUM for each measurement can be tedious and even impossible. On the other hand, international standards require that for a proof of the conformance to specifications, the measurement uncertainty must be taken into account. Apart from this it is not so consistent that a lot is invested in the calibration of instruments where it is still unclear what the uncertainty is of measurements carried out with these 'calibrated' instruments. In this paper it is shown that the 'standard' GUM-uncertainty budget can be modified in several ways to accommodate more complicated measurements. Also, it is shown how this budget can be generated automatically by the measuring instrument, by the simulation of measurements by instruments with alternative metrological characteristics, so called virtual instruments. This can lead to a measuring instrument where, next to the measured value, also the uncertainty is displayed. It is shown how these principles are already used for roughness instruments, and how they can be used as well for e.g. roundness, cylindricity, flatness and CMM measurements.

Citation Download Citation

Han Haitjema, Bas W. van Dorp, M. Morel, and Piet H. J. Schellekens "Uncertainty estimation by the concept of virtual instruments", Proc. SPIE 4401, Recent Developments in Traceable Dimensional Measurements, (22 October 2001); https://doi.org/10.1117/12.445615

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available