The performance of an actinic full-field EUVL mask blank inspection system

Takeshi Yamane; Teruo Iwasaki; Toshihiko Tanaka; Tsuneo Terasawa; Osamu Suga; Toshihisa Tomie

doi:10.1117/12.813595

18 March 2009 The performance of an actinic full-field EUVL mask blank inspection system

Takeshi Yamane, Teruo Iwasaki, Toshihiko Tanaka, Tsuneo Terasawa, Osamu Suga, Toshihisa Tomie

Proceedings Volume 7271, Alternative Lithographic Technologies; 72713H (2009) https://doi.org/10.1117/12.813595
Event: SPIE Advanced Lithography, 2009, San Jose, California, United States

Abstract

We have developed an actinic full-field inspection system to detect multilayer phase defects with dark field imaging capabilities. With this inspection system programmed phase defects on a mask blank were observed, and their image quality was compared with that from a proof of concept (POC) tool. The maximum intensity of normalized defect signal with the inspection system is 3.1 times larger and the full width at the half maximum (FWHM) of the defect signal is 13 % narrower than those with the POC tool. And therefore, the image quality of this inspection system is considered to be superior to that of the POC tool. In the case where the defect image is captured with stage scanning using time delay integration (TDI) method, degradation of defect signals caused by stage scanning is evaluated. With a scan velocity of 1mm/s, the defect signal indicates a 19 % decrease in the maximum intensity and a 13 % extension to the FWHM as compared with those from the static mode. We believe that this degradation of defect signal is caused by the variation of scan velocity and yawing of the scan stage. The relation between defect sensitivity and scan velocity is analyzed with signal to noise ratio (SNR). As a result, a scan velocity of 1mm/s plays a role that is barely sufficient to detect a 1.5 nm-high 60 nm-wide defect with no false defect detection. Noise reduction of CCD or improvement of inspection algorithm will be required.

Citation Download Citation

Takeshi Yamane, Teruo Iwasaki, Toshihiko Tanaka, Tsuneo Terasawa, Osamu Suga, and Toshihisa Tomie "The performance of an actinic full-field EUVL mask blank inspection system", Proc. SPIE 7271, Alternative Lithographic Technologies, 72713H (18 March 2009); https://doi.org/10.1117/12.813595

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available