Novel Kalman filtering method for the suppression of gyroscope noise effects in pointing and tracking systems

Marcelo C. Algrain; Douglas E. Ehlers

doi:10.1117/12.210754

1 October 1995 Novel Kalman filtering method for the suppression of gyroscope noise effects in pointing and tracking systems

Marcelo C. Algrain, Douglas E. Ehlers

Author Affiliations +

Optical Engineering, Vol. 34, Issue 10, (October 1995). https://doi.org/10.1117/12.210754

Abstract

A primary cause of degraded performance in pointing and tracking systems is the jitter in the line of sight. This jitter is caused by the residual angular motion of the stabilized platform within the system. A major contributor to this residual motion is the gyroscope noise. Thus, to reduce angular jitter, lower-noise gyroscopes are selected, generally at a premium cost. Another approach is to enhance the accuracy of the gyroscopes electronically (by suppressing measurement noise) before their outputs are fed into the stabilized platform control system. Optimal filtering techniques can be used for this purpose. The goal is to estimate the platform motion so that the calculated value is closer to the actual value than the measurement is. Enhanced performance is obtained at the expense of added complexity, but in many cases this approach may prove to be more economical than resorting to more precise and costly lower-noise gyroscopes. This paper presents a novel Kalman filtering method that provides more accurate angular motion estimates than the measured values. The effectiveness of this method is evaluated through a computer simulation case study. The simulation demonstrates that the new approach yields excellent 3-D angular velocity estimates, very small mean square estimation errors, and over a 5-to-i improvement (in the mean-square sense) over angular velocity measurements obtained from three orthogonal gyroscopes. The enhanced 3-D angular velocity estimates can be fed into the platform stabilization control system rather than feeding raw gyroscope measurements, thus significantly reducing the contribution of gyroscope noise toward the overall jitter in a stabilized platform. This would permit a relaxation on gyroscope noise specifications, which could lead to substantial savings while maintaining the same error budget.

Citation Download Citation

Marcelo C. Algrain and Douglas E. Ehlers "Novel Kalman filtering method for the suppression of gyroscope noise effects in pointing and tracking systems," Optical Engineering 34(10), (1 October 1995). https://doi.org/10.1117/12.210754

Published: 1 October 1995

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available