Prof. Diann E. Brei Profile

Prof. Diann E. Brei

Professor at Univ of Michigan

SPIE Involvement:

Conference Program Committee | Author

Publications (41)

Proceedings Article | 28 April 2023 Presentation

Antagonistic actuation of hinged tile-based curling air surface for advanced functionalities

Tiantian Li, Jonathan Luntz, Diann Brei, Paul Alexander, Wonhee Kim

Proceedings Volume PC12483, PC124830F (2023) https://doi.org/10.1117/12.2666236

KEYWORDS: Bladder, Design and modelling, Control systems, Vacuum, Model-based design, Integration, Bistability

Read Abstract +

Proceedings Article | 28 April 2023 Presentation

Topology optimization of multi-axial rigid load-bearing tendon constrained inflatables for tailored wheelchair headrest interfaces

Ellen Kim, Jonathan Luntz, Diann Brei

Proceedings Volume PC12483, PC124830N (2023) https://doi.org/10.1117/12.2666219

KEYWORDS: Head, Design and modelling, Bladder, Resistance, Neck, Model-based design, Mathematical optimization, Kinematics, Genetics, Deformation

Read Abstract +

Proceedings Article | 24 March 2021 Open Access

Integrative smart systems: a call to action

Diann Brei

Proceedings Volume 11588, 1158803 (2021) https://doi.org/10.1117/12.2582249

Read Abstract +

Proceedings Article | 27 March 2018 Paper

Tile-based rigidization surface parametric design study

Laura Giner Munoz, Jonathan Luntz, Diann Brei, Wonhee Kim

Proceedings Volume 10602, 106020L (2018) https://doi.org/10.1117/12.2300912

KEYWORDS: Switching, Bladder, Prototyping

Read Abstract +

Inflatable technologies have proven useful in consumer goods as well as in more recent applications including civil structures, aerospace, medical, and robotics. However, inflatable technologies are typically lacking in their ability to provide rigid structural support. Particle jamming improves upon this by providing structures which are normally flexible and moldable but become rigid when air is removed. Because these are based on an airtight bladder filled with loose particles, they always occupy the full volume of its rigid state, even when not rigidized. More recent developments in layer jamming have created thin, compact rigidizing surfaces replacing the loose volume of particles with thinly layered surface materials. Work in this area has been applied to several specific applications with positive results but have not generally provided the broader understanding of the rigidization performance as a function of design parameters required for directly adapting layer rigidization technology to other applications. This paper presents a parametric design study of a new layer jamming vacuum rigidization architecture: tile-based vacuum rigidization. This form of rigidization is based on layers of tiles contained within a thin vacuum bladder which can be bent, rolled, or otherwise compactly stowed, but when deployed flat, can be vacuumed and form a large, flat, rigid plate capable of supporting large forces both localized and distributed over the surface. The general architecture and operation detailing rigidization and compliance mechanisms is introduced. To quantitatively characterize the rigidization behavior, prototypes rigidization surfaces are fabricated and an experimental technique is developed based on a 3-point bending test. Performance evaluation metrics are developed to describe the stiffness, load-bearing capacity, and internal slippage of tested prototypes. A set of experimental parametric studies are performed to better understand the impact of variations in geometric design parameters, operating parameters, and architectural variations on the performance evaluation metrics. The results of this study bring insight into the rigidization behavior of this architecture, and provide design guidelines and expose tradeoffs to form the basis for the design of tile-based rigidization surfaces for a wide range of applications.

Proceedings Article | 16 April 2014 Paper

Damper-controlled switch for SMA motion smoothing

Clover Aguayo, Brent Utter, Jonathan Luntz, Richard Gonzalez, Diann Brei, Nancy Johnson, Paul Alexander

Proceedings Volume 9059, 90590H (2014) https://doi.org/10.1117/12.2052871

KEYWORDS: Shape memory alloys, Actuators, Switches, Switching, Prototyping, Control systems, Power supplies, Data acquisition, Computer programming, Standards development

Read Abstract +

While the use of SMA-actuated devices continues to grow in many industries, current device limitations pose a challenge to successful adoption for certain classes of applications. SMA-actuated devices typically demonstrate motion with non-constant velocity due to the non-linear thermo-mechanically coupled behavior of SMA material transformation, and motion sensitivity to external factors such as voltage and load. This variation in motion can lead to the perception of poor device quality, limiting SMA-actuated devices to applications hidden from the sight of the product user, or requiring them to be augmented with higher cost controls to improve the motion quality. Therefore, a need exists for simple, passive, low-cost device technologies that enable the designer to prescribe desired motion characteristics with relative insensitivity to fluctuation in operating conditions. This paper presents a Damper Controlled Switch (DCS) mechanism that delivers constant velocity and relative insensitivity to operating conditions when combined with a standard SMA wire actuator. The DCS includes a damper that acts against a spring to open a switch when the velocity exceeds a tunable threshold. To validate the ability of the DCS to provide the desired motion quality, experiments were conducted comparing the normal motion of the SMA actuator to the motion produced when the same actuator was fitted with a DCS prototype. The addition of the DCS produced nearly constant actuator velocity, performing significantly better than the SMA actuator alone. The tunability of the DCS was demonstrated producing a wide range of attainable constant velocities. Finally, a set of experiments explored the DCS’s sensitivity to voltage and load, indicating a low sensitivity to a wide range of operating parameters for which the operating limits were identified. The DCS represents a simple, compact technology based on passive, low-cost components, providing a very practical solution that will enable integration of SMA-actuated devices into a broader class of applications.

Proceedings Article | 9 April 2010 Paper

Experimental investigation of active rib stitch knitted architecture for flow control applications

Julianna Abel, Poorna Mane, Benjamin Pascoe, Jonathan Luntz, Diann Brei

Proceedings Volume 7643, 76430H (2010) https://doi.org/10.1117/12.847699

KEYWORDS: Prototyping, Actuators, Aerodynamics, Shape memory alloys, Aluminum, Control systems, Skin, Smart materials, Manufacturing, Computer architecture

Read Abstract +

Proceedings Article | 7 April 2009 Paper

Design and operation of a fully implantable SMA actuated implant for correcting short bowel syndrome

Brent Utter, Jonathan Luntz, Diann Brei, Daniel Teitelbaum, Manabu Okawada, Eiichi Miyasaka

Proceedings Volume 7288, 72881A (2009) https://doi.org/10.1117/12.819397

KEYWORDS: Shape memory alloys, Sensors, Tissues, Transceivers, Intestine, Data communications, Control systems, Telecommunications, Motion measurement, Electronic test equipment

Read Abstract +

Proceedings Article | 7 April 2009 Paper

Design and preliminary testing of a handheld antagonistic SMA actuator for cancellation of human tremor

Anupam Pathak, Diann Brei, Jonathan Luntz

Proceedings Volume 7288, 72881B (2009) https://doi.org/10.1117/12.819398

KEYWORDS: Shape memory alloys, Actuators, Sensors, Instrument modeling, Motion models, Control systems, Kinematics, Prototyping, Device simulation, Performance modeling

Read Abstract +

Proceedings Article | 1 April 2009 Paper

SMA wire actuator modular design framework

Jonathan Luntz, Brian Barnes, Diann Brei, Paul Alexander, Alan Browne, Nancy Johnson

Proceedings Volume 7290, 729008 (2009) https://doi.org/10.1117/12.816752

KEYWORDS: Shape memory alloys, Actuators, Computer architecture, Interfaces, Systems modeling, Human-machine interfaces, Optimization (mathematics), Data modeling, Manufacturing, Performance modeling

Read Abstract +

Proceedings Article | 28 March 2009 Paper

Effect of bending on the performance of spool-packaged shape memory alloy actuators

John Redmond, Diann Brei, Jonathan Luntz, Alan Browne, Nancy Johnson

Proceedings Volume 7290, 729007 (2009) https://doi.org/10.1117/12.816666

KEYWORDS: Shape memory alloys, Actuators, Motion models, Data modeling, Nano opto mechanical systems, Packaging, Performance modeling, Motion measurement, Motion analysis, Analytical research

Read Abstract +

Proceedings Article | 2 April 2008 Paper

Carbon nanotube (CNT) fins for enhanced cooling of shape memory alloy wire

Anupam Pathak, Joseph AuBuchon, Diann Brei, John Shaw, Jonathan Luntz, Sungho Jin

Proceedings Volume 6929, 69291K (2008) https://doi.org/10.1117/12.774147

KEYWORDS: Shape memory alloys, Carbon nanotubes, Plasma enhanced chemical vapor deposition, Infrared cameras, Cameras, Temperature metrology, Convection, Scanning electron microscopy, Particles, Plasma

Read Abstract +

Proceedings Article | 1 April 2008 Paper

Behavioral model and experimental validation for a spool-packaged shape memory alloy actuator

John Redmond, Diann Brei, Jonathan Luntz, Alan Browne, Nancy Johnson

Proceedings Volume 6930, 693004 (2008) https://doi.org/10.1117/12.775986

KEYWORDS: Shape memory alloys, Actuators, Motion models, Packaging, Data modeling, Performance modeling, Manufacturing, Chemical elements, Motion measurement, Instrument modeling

Read Abstract +

Proceedings Article | 25 March 2008 Paper

Dynamic characterization and single-frequency cancellation performance of SMASH (SMA actuated stabilizing handgrip)

Anupam Pathak, Diann Brei, Jonathan Luntz, Chris LaVigna, Harry Kwatny

Proceedings Volume 6926, 692602 (2008) https://doi.org/10.1117/12.774208

KEYWORDS: Shape memory alloys, Actuators, Firearms, Smoothing, Sensors, Motion measurement, Weapons, Control systems, Motion models, Aluminum

Read Abstract +

Proceedings Article | 20 March 2008 Paper

Stabilizing shape memory alloy actuator performance through cyclic shakedown: an empirical study

Helen Sun, Anupam Pathak, Jonathan Luntz, Diann Brei, Paul Alexander, Nancy Johnson

Proceedings Volume 6930, 69300Q (2008) https://doi.org/10.1117/12.775998

KEYWORDS: Shape memory alloys, Actuators, Smart structures, Manufacturing, Thermal modeling, Performance modeling

Read Abstract +

Proceedings Article | 19 March 2008 Paper

Shape memory alloy resetable spring lift for pedestrian protection

Brian Barnes, Diann Brei, Jonathan Luntz, Kenneth Strom, Alan Browne, Nancy Johnson

Proceedings Volume 6930, 693005 (2008) https://doi.org/10.1117/12.775994

KEYWORDS: Shape memory alloys, Teeth, Computer aided design, Actuators, Head, Prototyping, Ultrafast phenomena, Finite element methods, Capacitors, Safety

Read Abstract +

Proceedings Article | 19 March 2008 Paper

Experimental investigation of active adaptability of the SMArt (SMA reseTtable) dual-chamber pneumatic lift device for pedestrian protection

James Otten, Jonathan Luntz, Diann Brei, Kenneth Strom, Alan Browne, Nancy Johnson

Proceedings Volume 6930, 693006 (2008) https://doi.org/10.1117/12.775992

KEYWORDS: Shape memory alloys, Ultrafast phenomena, Capacitors, Control systems, Prototyping, Temperature metrology, Plutonium, Smart materials, Tellurium, Lead

Read Abstract +

Proceedings Article | 18 April 2007 Paper

Jitter control for an initially stablized tactical rifle

Alejandro White, Douglas Lindner, Chris LaVigna, Diann Brei

Proceedings Volume 6523, 652303 (2007) https://doi.org/10.1117/12.714499

KEYWORDS: Control systems design, Firearms, Actuators, Lead, Control systems, Electronics, Motion measurement, Power supplies, Smart materials, Computer engineering

Read Abstract +

Proceedings Article | 11 April 2007 Paper

General Motors and the University of Michigan smart materials and structures collaborative research laboratory

Diann Brei, Jonathan Luntz, John Shaw, Nancy Johnson, Alan Browne, Paul Alexander, Nilesh Mankame

Proceedings Volume 6527, 65270U (2007) https://doi.org/10.1117/12.715334

KEYWORDS: Smart materials, Shape memory alloys, Basic research, Analytical research, Packaging, Aerospace engineering, Control systems, Instrument modeling, Actuators

Read Abstract +

Proceedings Article | 11 April 2007 Paper

Feasibility study of the dual-chamber SMART (SMA ReseTtable) lift device

Jonathan Luntz, Diann Brei, Joe Ypma, Jonathan Young, Joshua Radice, Nancy Johnson, Alan Browne, Kenneth Strom

Proceedings Volume 6527, 65270V (2007) https://doi.org/10.1117/12.715727

KEYWORDS: Shape memory alloys, Prototyping, Ultrafast phenomena, Actuators, Instrument modeling, Systems modeling, Aluminum, Performance modeling, Head, Motion measurement

Read Abstract +

Pedestrian protection is a major focus of automotive crashworthiness with new regulations taking effect worldwide. While there are many approaches to reducing the head-injury-criteria (HIC), a leading approach is to actively lift the hood to increase the crush distance to rigid underhood components. Most current lift devices are single-use, requiring the hood to be manually returned to a drivable position, and may damage the hood during lift due to inappropriate lift rates. This paper addresses these issues with an alternative approach using stored energy marrying conventional (pneumatic) and smart materials (Shape Memory Alloy) actuation. The SMART (SMA ReseTtable) hood lift device comprises a dual chamber cylinder which releases stored pneumatic energy via an ultra-fast SMA exhaust valve, raising a piston attached to the hood. The device can be automatically reset and rearmed through pressurization of the chambers and the energy dissipated for service by evacuating both chambers. This approach is unique in that several design parameters such as pressure and valve opening/timing profile can be altered in the field to compensate for temperature, added mass (such as snow) or platform changes. This paper presents the concept of this device and the parametric design of the pneumatic cylinder and valve orifice based on an analytical performance model. Two valve concepts are presented: direct and indirect, where the direct valve is simpler and more controllable, but the indirect valve can provide larger orifices (and therefore faster lift times) with reduced actuation requirements. Using a combination of analytical model-based and experimental methods, the SMART lift device with each valve approach was designed, and a full-scale prototype built and experimentally characterized validating the model and successfully demonstrating feasibility of each system to meet and exceed the pedestrian protection specifications. This new set of technologies enables the hood lift application with added functionality such as tailorability and resettability.

Proceedings Article | 6 April 2007 Paper

Design and quasi-static characterization of SMASH SMA (Stabilizing Handgrip)

Anupam Pathak, Diann Brei, Jonathan Luntz, Chris LaVigna, Harry Kwatny

Proceedings Volume 6523, 652304 (2007) https://doi.org/10.1117/12.715389

KEYWORDS: Shape memory alloys, Actuators, Firearms, Prototyping, Cameras, Safety, Sensors, Transducers, Optics manufacturing, Manufacturing

Read Abstract +

Proceedings Article | 5 April 2006 Paper

Mechanical extension implants for short-bowel syndrome

Jonathan Luntz, Diann Brei, Daniel Teitelbaum, Ariel Spencer

Proceedings Volume 6173, 617309 (2006) https://doi.org/10.1117/12.659112

KEYWORDS: Shape memory alloys, Prototyping, Intestine, Teeth, Tissues, Motion measurement, Absorption, Actuators, Surgery, Silicon

Read Abstract +

Proceedings Article | 5 April 2006 Paper

The fabrication and deformation capabilities of two dimensionally graded DEPP FGP

Paul Alexander, Diann Brei, John Halloran

Proceedings Volume 6173, 617301 (2006) https://doi.org/10.1117/12.658638

KEYWORDS: Actuators, Performance modeling, Fabrication, Ferroelectric materials, Dielectrics, Microfabrication, Motion models, Ceramics, Matrices, Prototyping

Read Abstract +

Proceedings Article | 27 March 2006 Paper

A dynamic model for generating actuator specifications for small arms barrel active stabilization

Anupam Pathak, Diann Brei, Jonathan Luntz, Chris Lavigna

Proceedings Volume 6166, 61660D (2006) https://doi.org/10.1117/12.659175

KEYWORDS: Actuators, Firearms, Systems modeling, Weapons, Motion models, Data modeling, Interfaces, Cesium, Smart materials, Error analysis

Read Abstract +

Proceedings Article | 17 May 2005 Paper

The fabrication and material characterization of PZT based functionally graded piezoceramics

Paul Alexander, Diann Brei, John Halloran

Proceedings Volume 5764, (2005) https://doi.org/10.1117/12.599749

KEYWORDS: Ferroelectric materials, Actuators, Ceramics, Surface finishing, Dielectrics, Fabrication, Material characterization, Microfabrication, Polishing, Reliability

Read Abstract +

Proceedings Article | 5 August 2003 Paper

Development and demonstration of INSTAR: inertially stabilized rifle

Diann Brei, James Vendlinski, Douglas Lindner, Huiyu Zhu, Chris LaVigna

Proceedings Volume 5056, (2003) https://doi.org/10.1117/12.483457

KEYWORDS: Actuators, Electronics, Amplifiers, Firearms, Prototyping, Switching, Control systems, Power supplies, Sensors, Capacitors

Read Abstract +

Proceedings Article | 5 August 2003 Paper

Actuation development and evaluation for INSTAR: inertially stabilized rifle

Diann Brei, James Vendlinski, Mary Frecker, Smita Bharti

Proceedings Volume 5056, (2003) https://doi.org/10.1117/12.483458

KEYWORDS: Actuators, Prototyping, Firearms, Chemical elements, Finite element methods, Amplifiers, Solids, Electronics, Aluminum, Smart materials

Read Abstract +

Proceedings Article | 13 March 2003 Paper

Intertially stabilized rifle using smart materials

Douglas Lindner, Diann Brei, Chris LaVigna

Proceedings Volume 4763, (2003) https://doi.org/10.1117/12.508677

KEYWORDS: Actuators, Electronics, Firearms, Amplifiers, Smart materials, Switching, Heart, Smart structures, Energy efficiency, Energy transfer

Read Abstract +

Proceedings Article | 9 July 2002 Paper

Application of SMA technology to auxiliary functions in appliances

Bart Johnson, Diann Brei, John Patera

Proceedings Volume 4698, (2002) https://doi.org/10.1117/12.475089

KEYWORDS: Shape memory alloys, Picosecond phenomena, Prototyping, Fourier transforms, Actuators, Resistors, Performance modeling, Head, Stereolithography, Aluminum

Read Abstract +

Proceedings Article | 16 August 2001 Paper

Experimental characterization and model validation of the quasi-static performance of piezoceramic telescopic actuators

Paul Alexander, Diann Brei

Proceedings Volume 4327, (2001) https://doi.org/10.1117/12.436546

KEYWORDS: Actuators, Prototyping, 3D modeling, Polymers, Performance modeling, Polymeric actuators, Error analysis, Electrodes, Polymerization, Ferroelectric materials

Read Abstract +

Proceedings Article | 14 June 2001 Paper

Proof of concept of a novel SMA cage actuator

Christopher Deyer, Diann Brei

Proceedings Volume 4332, (2001) https://doi.org/10.1117/12.429661

KEYWORDS: Shape memory alloys, Actuators, Diffractive optical elements, Prototyping, Amplifiers, Ceramics, Smart materials, Sensors, Signal analyzers, Time metrology

Read Abstract +

Proceedings Article | 22 June 2000 Paper

Fabrication and experimental characterization of d31 telescopic piezoelectric actuators

Paul Alexander, Diann Brei, Weiguo Miao, John Halloran, Richard Gentilman, Gerald Schmidt, Patrick McGuire, John Hollenbeck

Proceedings Volume 3985, (2000) https://doi.org/10.1117/12.388825

KEYWORDS: Actuators, Prototyping, Fabrication, Ceramics, Ferroelectric materials, Polymers, Polymerization, Aluminum, Polymeric actuators, Solids

Read Abstract +

Proceedings Article | 14 June 2000 Paper

Feasibility study of microfabrication by coextrusion (MFCX) hollow fibers for active composites

Bryan Cannon, Diann Brei

Proceedings Volume 3992, (2000) https://doi.org/10.1117/12.388238

KEYWORDS: Composites, Optical fibers, Electrodes, Prototyping, Carbon, Epoxies, Performance modeling, Ferroelectric materials, Microfabrication, Finite element methods

Read Abstract +

Proceedings Article | 12 June 2000 Paper

Investigation of PVdF active diaphragms for synthetic jets

Kelly Bailo, Diann Brei, Frederick Calkins

Proceedings Volume 3991, (2000) https://doi.org/10.1117/12.388164

KEYWORDS: Ferroelectric polymers, Prototyping, Aerodynamics, Motion models, Actuators, Chemical elements, 3D modeling, Multilayers, Solids, Fluid dynamics

Read Abstract +

Proceedings Article | 27 July 1998 Paper

Polymeric piezoelectric acoustic semicircular transducers

Kelly Bailo, Diann Brei, Karl Grosh

Proceedings Volume 3329, (1998) https://doi.org/10.1117/12.316889

KEYWORDS: Acoustics, Transducers, Prototyping, Ferroelectric polymers, Polymers, 3D modeling, Signal analyzers, Electrodes, Mathematical modeling, Performance modeling

Read Abstract +

Proceedings Article | 27 July 1998 Paper

Force deflection characterization of series arrays of piezoelectric C-block actuators

Andrew Moskalik, Diann Brei

Proceedings Volume 3329, (1998) https://doi.org/10.1117/12.316934

KEYWORDS: Prototyping, Actuators, Polymers, Ferroelectric polymers, Ferroelectric materials, Electrodes, Manufacturing, Epoxies, Data modeling, Smart structures

Read Abstract +

Proceedings Article | 24 July 1998 Paper

Parallel and serial connections for piezoceramic recurve actuator arrays

James Ervin, Diann Brei

Proceedings Volume 3323, (1998) https://doi.org/10.1117/12.316352

KEYWORDS: Actuators, Prototyping, Ferroelectric materials, Composites, Error analysis, Transducers, Lithium, Packaging, Epoxies, Aluminum

Read Abstract +

Proceedings Article | 20 July 1998 Paper

New microfabrication technique for electroactive ceramic and electrode materials

Aaron Crumm, Emilio Nelli Silva, Noboru Kikuchi, Diann Brei, John Halloran

Proceedings Volume 3324, (1998) https://doi.org/10.1117/12.316872

KEYWORDS: Ceramics, Electrodes, Microfabrication, Actuators, Sensors, Palladium, Fabrication, Ferroelectric materials, Photomicroscopy, Silver

Read Abstract +

Proceedings Article | 6 June 1997 Paper

Frequency-amplitude response of individual polyvinylidene fluoride piezoelectric C-block actuators

Andrew Moskalik, Diann Brei

Proceedings Volume 3041, (1997) https://doi.org/10.1117/12.275672

KEYWORDS: Actuators, Prototyping, Ferroelectric polymers, Motion models, Composites, Polymers, Modal analysis, Smart structures, Electrodes, Smart materials

Read Abstract +

Proceedings Article | 1 May 1996 Paper

Deflection-voltage performance of asymmetrically activated piezoelectric C-block actuators

Diann Brei, James Ervin, Andrew Moskalik

Proceedings Volume 2717, (1996) https://doi.org/10.1117/12.239031

KEYWORDS: Ceramics, Actuators, Prototyping, Polymers, Ferroelectric polymers, Ferroelectric materials, Performance modeling, Smart structures, Electrodes, Mathematical modeling

Read Abstract +

Proceedings Article | 8 May 1995 Paper

Force-deflection behavior for C-block piezoelectric actuator architectures

Diann Brei

Proceedings Volume 2443, (1995) https://doi.org/10.1117/12.208274

KEYWORDS: Actuators, Performance modeling, Electrodes, Prototyping, Ferroelectric polymers, Composites, Polymers, Smart structures, Vibration control, Epoxies

Read Abstract +

Proceedings Article | 2 February 1995 Paper

Design and development of a new class of piezoelectric actuators for force improvement

Diann Brei

Proceedings Volume 2427, (1995) https://doi.org/10.1117/12.200929

Read Abstract +

Showing 5 of 41 publications

Conference Committee Involvement (34)

Active and Passive Smart Structures and Integrated Systems XIX

17 March 2025 | Vancouver, Canada

Active and Passive Smart Structures and Integrated Systems XVIII

25 March 2024 | Long Beach, California, United States

Active and Passive Smart Structures and Integrated Systems XVII

13 March 2023 | Long Beach, California, United States

Active and Passive Smart Structures and Integrated Systems XVI

7 March 2022 | Long Beach, California, United States

Active and Passive Smart Structures and Integrated Systems XV

8 March 2021 | Online Only, California, United States

Smart Structures and NDE for Industry 4.0, Smart Cities, and Energy Systems

27 April 2020 | Online Only, California, United States

Active and Passive Smart Structures and Integrated Systems XIV

27 April 2020 | Online Only, California, United States

Active and Passive Smart Structures and Integrated Systems XIII

4 March 2019 | Denver, Colorado, United States

Smart Structures and NDE for Energy Systems and Industry 4.0

4 March 2019 | Denver, Colorado, United States

Active and Passive Smart Structures and Integrated Systems XII

5 March 2018 | Denver, Colorado, United States

Smart Structures and NDE for Industry 4.0

5 March 2018 | Denver, Colorado, United States

Active and Passive Smart Structures and Integrated Systems XI

26 March 2017 | Portland, Oregon, United States

Industrial and Commercial Applications of Smart Structures Technologies XI

26 March 2017 | Portland, Oregon, United States

Active and Passive Smart Structures and Integrated Systems X

21 March 2016 | Las Vegas, Nevada, United States

Industrial and Commercial Applications of Smart Structures Technologies X

21 March 2016 | Las Vegas, Nevada, United States

Active and Passive Smart Structures and Integrated Systems IX

9 March 2015 | San Diego, California, United States

Industrial and Commercial Applications of Smart Structures Technologies IX

9 March 2015 | San Diego, California, United States

Industrial and Commercial Applications of Smart Structures Technologies VIII

11 March 2014 | San Diego, California, United States

Active and Passive Smart Structures and Integrated Systems VIII

10 March 2014 | San Diego, California, United States

Active and Passive Smart Structures and Integrated Systems VII

10 March 2013 | San Diego, California, United States

Industrial and Commercial Applications of Smart Structures Technologies VII

10 March 2013 | San Diego, California, United States

Active and Passive Smart Structures and Integrated Systems VI

12 March 2012 | San Diego, California, United States

Industrial and Commercial Applications of Smart Structures Technologies VI

12 March 2012 | San Diego, California, United States

Active and Passive Smart Structures and Integrated Systems V

7 March 2011 | San Diego, California, United States

Industrial and Commercial Applications of Smart Structures Technologies V

7 March 2011 | San Diego, California, United States

Active and Passive Smart Structures and Integrated Systems IV

8 March 2010 | San Diego, California, United States

Industrial and Commercial Applications of Smart Structures Technologies IV

8 March 2010 | San Diego, California, United States

Active and Passive Smart Structures and Integrated Systems III

9 March 2009 | San Diego, California, United States

Active and Passive Smart Structures and Integrated Systems II

10 March 2008 | San Diego, California, United States

Active and Passive Smart Structures and Integrated Systems

19 March 2007 | San Diego, California, United States

Smart Structures and Integrated Systems

27 February 2006 | San Diego, California, United States

Smart Structures and Integrated Systems

7 March 2005 | San Diego, California, United States

Smart Structures and Integrated Systems

15 March 2004 | San Diego, CA, United States

Smart Structures and Integrated Systems

3 March 2003 | San Diego, California, United States

Showing 5 of 34 Conference Committees

View contact details

UPDATE YOUR PROFILE

Is this your profile? Update it now.

Sign into your SPIE.org account

Don’t have a profile and want one?

Create an account on SPIE.org

Keywords/Phrases

Search In:

Publication Years