The effects of etch chemistry on the etch rates of ArF BARC products

Hong Zhuang; Dave Abdallah; Zhong Xiang; Hengpeng Wu; Jianhui Shan; Ping-Hung Lu; Mark Neisser; Eugene J. Karwacki; Bing Ji; Peter R. Badowski

doi:10.1117/12.657128

29 March 2006 The effects of etch chemistry on the etch rates of ArF BARC products

Hong Zhuang, Dave Abdallah, Zhong Xiang, Hengpeng Wu, Jianhui Shan, Ping-Hung Lu, Mark Neisser, Eugene J. Karwacki, Bing Ji, Peter R. Badowski

Author Affiliations +

Proceedings Volume 6153, Advances in Resist Technology and Processing XXIII; 61530N (2006) https://doi.org/10.1117/12.657128
Event: SPIE 31st International Symposium on Advanced Lithography, 2006, San Jose, California, United States

Abstract

As the feature sizes of integrated circuits shrink, highly anisotropic etching process (i.e., ion-assisted plasma etch, or reactive ion etch (RIE)), becomes even more essential for successful pattern transfer in the fabrication of semiconductor devices. The stringent 193 nm lithography process necessitates the use of bottom anti-reflective coating (BARC) for controlling reflections and improving swing ratios. Prior to RIE of a patterned wafer, the BARC layer must first be opened to allow pattern transfer from the resist mask to the underlying films. As we enter the era of sub-90nm imaging, minimum loss of the photoresist during the BARC open step is becoming more critical, since the demand for higher optical resolution dictates the use of ever thinner resist films. This in turn requires higher etch rate of BARC materials. In this paper we report on the impact of etching gas chemistries on the etch rates of BARC materials. The correlation between the etch chemistry and BARC products will be discussed. Reactive ion etch rates for blanket BARC coatings and BARCs under resist patterns were measured. Etch rates of BARC products of various material compositions were measured with a typical ArF resist as reference. It is well known that the chemical composition and structure of organic materials essentially determine the etch rates under certain etch process conditions. The correlations between etch rates and BARC polymer chemistry are reported. Etch chemistries, (i.e. the chemical interaction of plasma reactive ions with BARC materials), may also have profound effects on etch rates. Here we report on results obtained using four etching gas chemistries to study how oxygen contents, polymerizing gases, and inert gas effect the etch rates of different ArF BARC products.

Citation Download Citation

Hong Zhuang, Dave Abdallah, Zhong Xiang, Hengpeng Wu, Jianhui Shan, Ping-Hung Lu, Mark Neisser, Eugene J. Karwacki, Bing Ji, and Peter R. Badowski "The effects of etch chemistry on the etch rates of ArF BARC products", Proc. SPIE 6153, Advances in Resist Technology and Processing XXIII, 61530N (29 March 2006); https://doi.org/10.1117/12.657128

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available