An IntenCD map of a reticle as a feed-forward input to DoseMapper

Michael Ben Yishai; Jo Finders; Robert Kazinczi; Arno Bleeker; Paul Luehrmann; Ingrid Janssen; Frank Duray; Lior Shoval; Christophe Couderc; Rich Piech; Noam Hillel; Ilan Englard

doi:10.1117/12.793124

19 May 2008 An IntenCD map of a reticle as a feed-forward input to DoseMapper

Michael Ben Yishai, Jo Finders, Robert Kazinczi, Arno Bleeker, Paul Luehrmann, Ingrid Janssen, Frank Duray, Lior Shoval, Christophe Couderc, Rich Piech, Noam Hillel, Ilan Englard

Author Affiliations +

Proceedings Volume 7028, Photomask and Next-Generation Lithography Mask Technology XV; 70283H (2008) https://doi.org/10.1117/12.793124
Event: Photomask and NGL Mask Technology XV, 2008, Yokohama, Japan

Abstract

The tight process window of advanced lithography in the semiconductor industry is further challenged by the growing contribution of photo-mask related CD variations. In previous technology generations, global measurement and global correction were sufficient to compensate for critical dimension uniformity (CDU) variations deriving from various sources. However, in the low K₁ regime for 45nm nodes and below, cross-coupled effects such as Mask Error Enhancement Factor (MEEF) and mask CDU can easily consume the overall CD budget related to lithographic process steps (see table 3). ASML's DoseMapper was designed to correct system (e.g. scanner, track) and non-system (e.g. mask) related errors controlled by an Automated Process Control (APC) system. It was introduced as a method for correcting intra-field and inter-field variations, relying on feedback from printed wafer based metrology. Here we propose using AMAT's IntenCD^TM map for supplying dense CDU measurement results from the reticle as a feed-forward input to DoseMapper. The IntenCD^TM application characterizes CD uniformity of 'features of interest' across the mask in the form of a dense map with high accuracy and throughput. The case studies presented in this paper are the result of collaboration between AMAT and ASML to demonstrate the benefit of feeding IntenCD output into DoseMapper CD analyzer which translates the mask CD map into a scanner dose recipe. The integrated solution can be implemented in manufacturing factories to shorten turnaround time and improve the exposure process window. It can be used to compensate for CDU effects due to mask production as well as contributions due to life time deterioration.

Citation Download Citation

Michael Ben Yishai, Jo Finders, Robert Kazinczi, Arno Bleeker, Paul Luehrmann, Ingrid Janssen, Frank Duray, Lior Shoval, Christophe Couderc, Rich Piech, Noam Hillel, and Ilan Englard "An IntenCD map of a reticle as a feed-forward input to DoseMapper", Proc. SPIE 7028, Photomask and Next-Generation Lithography Mask Technology XV, 70283H (19 May 2008); https://doi.org/10.1117/12.793124

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available