PROCEEDINGS VOLUME 8130
SPIE OPTICAL ENGINEERING + APPLICATIONS | 21-25 AUGUST 2011
Laser Beam Shaping XII
IN THIS VOLUME

0 Sessions, 28 Papers, 0 Presentations
Front Matter  (1)
Lasers  (4)
Applications  (3)
Proceedings Volume 8130 is from: Logo
SPIE OPTICAL ENGINEERING + APPLICATIONS
21-25 August 2011
San Diego, California, United States
Front Matter
Proc. SPIE 8130, Front Matter: Volume 8130, 813001 (8 October 2011); doi: 10.1117/12.915619
High Intensity Laser Beam Shaping
Proc. SPIE 8130, Beam shaping in the MegaJoule laser project, 813002 (7 September 2011); doi: 10.1117/12.895931
Proc. SPIE 8130, Improving temporal contrast by cross-polarized wave generation at a sub-petawatt laser facility, 813005 (7 September 2011); doi: 10.1117/12.891877
Lasers
Proc. SPIE 8130, Generation of pure TEMp0 modes using a friendly intracavity laser beam shaping technique, 813006 (7 September 2011); doi: 10.1117/12.892146
Proc. SPIE 8130, Laser guide star elongation and distributed launch optics, 813007 (22 September 2011); doi: 10.1117/12.892264
Proc. SPIE 8130, Intracavity vortex beam generation, 813009 (7 September 2011); doi: 10.1117/12.902330
Proc. SPIE 8130, Spatial and temporal self shaping for large mode area fiber laser system, 81300A (7 September 2011); doi: 10.1117/12.891255
Methods and Design
Proc. SPIE 8130, Annular ring zoom system using two positive axicons, 81300B (7 September 2011); doi: 10.1117/12.892621
Proc. SPIE 8130, Evaluation of DMD-based high-precision beam shaper using sinusoidal-flattop beam profile generation, 81300C (7 September 2011); doi: 10.1117/12.892840
Proc. SPIE 8130, Generation of flattop focusing with second order full Poincaré beams, 81300D (7 September 2011); doi: 10.1117/12.892869
Proc. SPIE 8130, Synthetic design and integrated fabrication of multifunctional hybrid beam shapers, 81300E (7 September 2011); doi: 10.1117/12.893768
Proc. SPIE 8130, Experimental realization of high-efficiency switchable optical OAM state generator and transformer, 81300F (15 September 2011); doi: 10.1117/12.894474
Applications
Proc. SPIE 8130, Comparing flat top and Gaussian focal beam shapes when micromachining steel, 81300G (7 September 2011); doi: 10.1117/12.895955
Proc. SPIE 8130, Laser beam shaping for studying thermally induced damage, 81300H (22 September 2011); doi: 10.1117/12.898514
Proc. SPIE 8130, Reducing beam shaper alignment complexity: diagnostic techniques for alignment and tuning, 81300I (22 September 2011); doi: 10.1117/12.895954
Technology Advances I
Proc. SPIE 8130, Diamond turning considerations in the manufacture of beam shaping optics, 81300K (22 September 2011); doi: 10.1117/12.893725
Proc. SPIE 8130, Spatial beam shaping for lowering the threshold energy for femtosecond laser pulse photodisruption, 81300M (22 September 2011); doi: 10.1117/12.900598
Technology Advances II
Proc. SPIE 8130, Imaging micro lens array beam integrator system design for fiber injection, 81300N (22 September 2011); doi: 10.1117/12.896738
Proc. SPIE 8130, Combination of a micro-lens multi-spot generator with a galvanometer scanner for flexible parallel micromachining of silicon, 81300O (22 September 2011); doi: 10.1117/12.892679
Poster Session
Proc. SPIE 8130, Strong reducing of the laser focal volume, 81300Q (22 September 2011); doi: 10.1117/12.892150
Proc. SPIE 8130, Laser beam shaping and mode conversion using vortex phase structures, 81300R (22 September 2011); doi: 10.1117/12.890505
Proc. SPIE 8130, Properties of propagation-invariant laser beams in the presence of obstructions, 81300S (22 September 2011); doi: 10.1117/12.891267
Proc. SPIE 8130, Pulse stretcher based on multilayer volume holographic gratings, 81300T (22 September 2011); doi: 10.1117/12.891995
Proc. SPIE 8130, Improvement of combining efficiency of coherent beam combination from phase-locked laser array by Dammann grating, 81300U (22 September 2011); doi: 10.1117/12.892652
Proc. SPIE 8130, Comparison of the diffraction characteristics of continuous wave, ultrashort laser pulse, and chirped ultrashort pulse diffracted by multilayer reflection volume holographic gratings, 81300V (22 September 2011); doi: 10.1117/12.892654
Proc. SPIE 8130, A study of optical design and optimization applied to lens module of laser beam shaping of advanced modern optical device, 81300W (22 September 2011); doi: 10.1117/12.893175
Proc. SPIE 8130, Investigation of optical vortices and hexagonal patterns in the interference of three plane waves, 81300X (22 September 2011); doi: 10.1117/12.894317
Proc. SPIE 8130, Dynamic parabolic optical lattice, 81300Y (22 September 2011); doi: 10.1117/12.894603
Back to Top