PROCEEDINGS VOLUME 8125
SPIE OPTICAL ENGINEERING + APPLICATIONS | 21-25 AUGUST 2011
Optomechanics 2011: Innovations and Solutions
IN THIS VOLUME

0 Sessions, 36 Papers, 0 Presentations
Front Matter  (1)
Systems  (4)
Analysis I  (3)
Analysis II  (4)
Proceedings Volume 8125 is from: Logo
SPIE OPTICAL ENGINEERING + APPLICATIONS
21-25 August 2011
San Diego, California, United States
Front Matter
Proc. SPIE 8125, Front Matter: Volume 8125, 812501 (26 October 2011); doi: 10.1117/12.916889
Subsystem Engineering
Proc. SPIE 8125, Optomechanical design for cost-effective DEMVAL systems, 812502 (24 September 2011); doi: 10.1117/12.893986
Proc. SPIE 8125, A tip/tilt mirror with large dynamic range for the ESO VLT Four Laser Guide Star Facility, 812503 (24 September 2011); doi: 10.1117/12.893682
Proc. SPIE 8125, Design and development of the fibre cable and fore optics of the HERMES Spectrograph for the Anglo-Australian Telescope (AAT), 812504 (24 September 2011); doi: 10.1117/12.896389
Proc. SPIE 8125, Design and development of a fast-steering secondary mirror for the Giant Magellan Telescope, 812505 (24 September 2011); doi: 10.1117/12.892411
Professional Development
Proc. SPIE 8125, Training of optomechanical engineers at the University of Rochester, 812506 (24 September 2011); doi: 10.1117/12.892577
Systems
Proc. SPIE 8125, Optomechanical design of ultrahigh-resolution monochromator and analyzer for inelastic x-ray scattering spectrometer at the advanced photon source, 812507 (24 September 2011); doi: 10.1117/12.894103
Proc. SPIE 8125, High-precision optical systems with inexpensive hardware: a unified alignment and structural design approach, 812509 (24 September 2011); doi: 10.1117/12.892635
Proc. SPIE 8125, RF-mechanical performance for the Haystack radio telescope, 81250A (24 September 2011); doi: 10.1117/12.890123
Proc. SPIE 8125, Optomechanical tolerancing with Monte Carlo techniques, 81250B (24 September 2011); doi: 10.1117/12.892580
Analysis I
Proc. SPIE 8125, Deformation analysis of tilted primary mirror for an off-axis beam compressor, 81250C (24 September 2011); doi: 10.1117/12.894167
Proc. SPIE 8125, Vibration analysis using digital image processing for in vitro imaging systems, 81250D (24 September 2011); doi: 10.1117/12.892430
Proc. SPIE 8125, Strength of glass from Hertzian line contact, 81250E (24 September 2011); doi: 10.1117/12.893583
Analysis II
Proc. SPIE 8125, Analysis of lens mount interfaces, 81250F (24 September 2011); doi: 10.1117/12.893948
Proc. SPIE 8125, Analytic results for high-precision and cryogenic lens holders, 81250G (24 September 2011); doi: 10.1117/12.893553
Proc. SPIE 8125, A parametric finite-element model for evaluating segmented mirrors with discrete edgewise connectivity, 81250H (24 September 2011); doi: 10.1117/12.893469
Proc. SPIE 8125, Tool for bonded optical element thermal stability analysis, 81250I (24 September 2011); doi: 10.1117/12.892961
Measuring, Testing, and Verification
Proc. SPIE 8125, Application of modal testing to characterize ground based telescope elastic motion and its effect on image quality, 81250J (24 September 2011); doi: 10.1117/12.899152
Proc. SPIE 8125, Thermal stress failure criteria for a structural epoxy, 81250K (24 September 2011); doi: 10.1117/12.893832
Proc. SPIE 8125, Acquisition, simulation, and test replication of weapon firing shock applied to optical sights, 81250L (24 September 2011); doi: 10.1117/12.893298
Proc. SPIE 8125, Novel optical refraction index sensor, 81250M (24 September 2011); doi: 10.1117/12.894563
Proc. SPIE 8125, Adhesive bond cryogenic lens cell margin of safety test, 81250N (24 September 2011); doi: 10.1117/12.891872
Mounts and Mechanisms
Proc. SPIE 8125, A few observations about mounting moderately sized mirrors, 81250O (24 September 2011); doi: 10.1117/12.890911
Proc. SPIE 8125, Lens mount with ring-flexures for athermalization, 81250P (24 September 2011); doi: 10.1117/12.892051
Proc. SPIE 8125, Mounting small optics for cryogenic space missions, 81250Q (24 September 2011); doi: 10.1117/12.896449
Proc. SPIE 8125, Design considerations of a slit diaphragm flexure used in a precision mirror gimbal, 81250R (24 September 2011); doi: 10.1117/12.890913
Optical Elements
Proc. SPIE 8125, Large stable aluminum optics for aerospace applications, 81250T (24 September 2011); doi: 10.1117/12.892039
Proc. SPIE 8125, Game-changing approaches to affordable advanced lightweight mirrors: Extreme Zerodur lightweighting and relief from the classical polishing parameter constraint, 81250U (12 October 2011); doi: 10.1117/12.896571
Proc. SPIE 8125, Controlling lines of sight and lines of propagation in stable systems, 81250V (24 September 2011); doi: 10.1117/12.895545
Poster Session
Proc. SPIE 8125, Automated semi-spherical irradiance meter, 81250W (24 September 2011); doi: 10.1117/12.892852
Proc. SPIE 8125, Alignment protocol for effective use of hard x-ray quad collimator for micro-crystallography, 81250X (24 September 2011); doi: 10.1117/12.894262
Proc. SPIE 8125, Stably joined optical tables, 81250Y (24 September 2011); doi: 10.1117/12.892846
Proc. SPIE 8125, Compact dynamic microfluidic iris array, 81250Z (24 September 2011); doi: 10.1117/12.892450
Proc. SPIE 8125, Thermo-opto-mechanical analysis of a cubesat lens mount, 812510 (24 September 2011); doi: 10.1117/12.893199
Proc. SPIE 8125, Design and verification of a robust secondary mirror adjustable supporting mechanism for airborne optical remote sensing instruments, 812511 (24 September 2011); doi: 10.1117/12.893202
Proc. SPIE 8125, Role of mirror dynamics in determining the accuracy of framing rate in an ultra high speed rotating mirror camera, 812512 (24 September 2011); doi: 10.1117/12.903618
Back to Top