23 March 2006 Characterization of large off-axis EUV mirrors with high accuracy reflectometry at PTB
Author Affiliations +
Abstract
CZ SMT AG produced large off-axis EUV mirrors as they are used e.g. in ASML's alpha demo tools, the predecessor for Extreme Ultraviolet Lithography (EUVL) production tools by ASML. The coating development and a large part of the actual coatings were done by the FOM-Institute. The Physikalisch-Technische Bundesanstalt (PTB) operates an EUV reflectometry facility at the electron storage ring BESSY II for at-wavelength metrology of full-size EUVL optics with a weight of up to 50 kg and a diameter of 550 mm. Critical issues for EUVL mirrors are the high reflectivity close to the theoretical limit, the matching of the period to the operating wavelength of the stepper (13.5 nm) and the imaging properties of the EUV optics. The full multilayer stack needs to be controlled laterally to such extend that the initial sub-nanometre surface figure of the substrate is preserved. The so-called added figure error should not exceed 100 pm in order to ensure faultless imaging at 13.5 nm wavelength. Here, we discuss representative results obtained at large off-axis EUV mirrors. We especially discuss the challenges of measurements at higher local angles of incidence according to the optical design and the accuracy needed in sample alignment for measurement of the coating profiles. PTB has shown excellent reproducibility for measurements of the near normal incidence reflectance of flat homogeneous mirrors over several years. For large off-axis EUV mirrors, measurements have to be done at angles significantly off normal, which dramatically increases the influence of angular alignment errors of the sample on the measured peak wavelength. Furthermore, according to the optical design, these optics have gradients of the coating thickness which require exact knowledge of the measurement position in the mirror coordinates. Extensive studies were done to estimate and validate the uncertainties connected to the sample alignment. Our results clearly show that it is possible to meet and verify the tight specifications for the lateral coating profiles of EUV multilayer mirrors. The non-correctable added figure error is significantly better than required and the overall reflectance of the coatings with a special protective capping layer is 65%.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Christian Laubis, Christian Laubis, Christian Buchholz, Christian Buchholz, Andreas Fischer, Andreas Fischer, Sven Plöger, Sven Plöger, Frank Scholz, Frank Scholz, Heike Wagner, Heike Wagner, Frank Scholze, Frank Scholze, Gerhard Ulm, Gerhard Ulm, Hartmut Enkisch, Hartmut Enkisch, Stephan Müllender, Stephan Müllender, Marco Wedowski, Marco Wedowski, Eric Louis, Eric Louis, Erwin Zoethout, Erwin Zoethout, } "Characterization of large off-axis EUV mirrors with high accuracy reflectometry at PTB", Proc. SPIE 6151, Emerging Lithographic Technologies X, 61510I (23 March 2006); doi: 10.1117/12.656246; https://doi.org/10.1117/12.656246
PROCEEDINGS
9 PAGES


SHARE
Back to Top